1: Volume Control
It took a while to find a suitable volume control as cheap potentiometers wouldn't last more than a few trips in bad weather. This encapsulated unit keeps your Backbiter nice and quiet so that the whole water doesn't know what your up to or what your catching whilst not compromising the quality of my Backbiters.
2: Weighted Drop Arm
The business end of the Backbiter and the Ultimate all round indicator. Slide the weight up the arm to keep pressure on the line and tight to the lead at range or when fishing in flow or slide all the way back for when fishing visible floats. I have now made this my standard arm as it gives you the best possible bite alarm.
The stainless steel ball line clip has adjustable tension and will register drop backs perfectly. The bobbin head will screw off so that an isotope or starlight can be added when night fishing. The Arm comes with a reflective orange sleeve that will go over the head for when fishing in daylight.
ADDITIONAL COST OPTIONS
ATTX REMOTE SYSTEM compatibility
£10 extra for each Backbiter
Now an established product the ATTX compatibility of Billy's Backbiters is a popular option that allow the angler to have a more discrete alarm that can't be heard by every other angler on the lake. Also Ideal for spaced rods or a rod stuck round a bush in the next swim (withing the EA 10m limit between rod buts of course face ;-))
I was a bit dubious about offering this as an option for pike welfare reasons but having talked with loads of pikers who want this option the reasons are obvious. Wind swept days on remote Fens with that third rod tucked around a bush. Busy pits where the slightest sound of a buzzer sees heads popping out of the undergrowth to see 'whose catching what'. There are numerous reasons to have a remote system and having field tested it for nearly 12 month now I'm confident that the system is robust and compatible with the quality of what I already offer.
Looking at all the remote systems out there I was drawn to the ATTX system for its compact size, robustness and I haven't been disappointed. Their remote transmitters plugs into a 3.5mm jack socket on the base of my adapted Backbiters (as shown below) and in doing so this will disable the speaker on the backbiter but not the light inside the box. The modified Backbiter is compatible with both the ATTX V1 & V2 systems.
(NOTE: ATTX remote system needs to be purchased separately. 3.5mm Jack Plug required. Adapters available if you already have the 2.5mm system)
A number of customers have made modifications to their Backbiters to add additional enhancements or modify to suit their set ups. The following add ons are now availible to Billys Backbiter customers.
MARK HOUGHTONS legendry Line Gate clips
Mark explains the advantges of the linegate system.....
"With the linegates, the line is free to run unhindered across the gate, effectively showing even the slightest slackening of the line, while still retaining a resistance - free release when line is taken on a full-blown run. Excessively heavy indicator heads are now unneccessary for all but extreme long range fishing. Similarly, twitch type takes are registered with equal efficiency.
Due to the way the linegates work, when the indicator is set correctly below horizontal the angle of the line prevents the gate opening, without having to increase resistance to a taking fish. Upon a take, the indicator will rise smoothly and virtually resistance-free and the gate will open freely. For Pike on pressured waters or in circumstances where they are feeding more relucantly than usual, the resistance - free operation of the linegate system has proved a boon. Likewise for other predatory species such as Zander and Eels, which often won`t tolerate any resistance upon the take the linegate system is far superior to standard line clips."
Linegate arms will soon be availible in either Marks standard 'egg head' design......
The cost of Billys Backbiter arms with Linegate heads will be £10 each and availible soon.
John Paynes ROD Pod Extensions
I will not be selling these but John Payne, a customer of mine has started to manufacture them on request. He needed them for a water where a Pod was a necessary and very neat they are too. These are available direct from John Payne who can be contacted on the following email address email@example.com .
(aluminium Pod adapters available from John Payne)
Weighted Drop Arm for Rear Rest
Currently not available due to supplier issues.
Since I started offering these arms as an option for my Back Biters I've been inundated with enquiries for them to be sold separately. If you still can't be convinced that backbiters are the way forward then you still need reliable slack line detection. Until now there hasn't been a quality Drop Arm on the market but that's changed.
These fit the bill perfectly and are easily detached from a dovetailed bank stick adapter for storage. The stainless clip registers drop backs perfectly.
Each arm comes with a choice of reflective sleeve of fluorescent tape to cover the bobbin head or alternatively the head can be unscrewed in order to fit an Isotope of starlight. I also include a packet of star lights with each order.
Available in RED, BLUE or YELLOW.